*Tutorial*DIY Scrappy Quilt Placemat
Welcome to my Scrappy Quilt Project No.1! When I started brainstorming what to do with my unfavored or leftover fabric, I immediately thought of something I can use without much care and something practical rather than trying to do something artistic.
So, I looked around my house, and came up with new placemats! Really, the ones I am using were made about 8 years ago! 😂 Certainly it was time to make new ones.
Scrappy Granny Square Block
For this project, I used a modified version of the Granny Square block. I have made a couple quilts using this block in the past. At that time, I used strips to connect the squares.
However, since I am using the precut scrap squares I made last week, I pieced one square at a time just like you would do a nine patch. Honestly though, there was not much difference as far as time goes. So, I think either way works fine.
Materials
***The material list below is for one placaemat***
***All seam allowances are 1/4”
***Finished size: Apprx. 17” x 11 1/2”
(59) 2 1/2” Assorted Squares
Binding tape about 70” ( I used 2 1/2” tape)
(1) 22” x 16” for backing
(1) 20” x 13” for batting
I added a blank layout for “Color Your Own”.
Instructions
1. Make (3) strips with 9 squares, (2) strips with 7 squares, (2) strips with 5 squares, (2) strips with 3 squares. After this, you should have 2 squares left, which will be attached to each 3 square strips.
2. Layout the strips, and press seams toward to one direction alternating by each strip.
3. Sew the strips together paying attention to the diagram. Square up the block trimming 1/4” away from the point.
4. Make a quilt sandwich with batting and backing, and quilt as you like. I simply used a walking foot.
5. Square up the quilt and bind it to finish. If you are new to binding, check out this post.
I hope you enjoyed making this small project!